1300A High-speed Slitting Machine
Suitable for :
This machine suitable for a lot of paper 40-300g/m2 ,paper&film laminated etc best jumbo roll cutting machine. It
is top quality cutting machine in China.
Characteristic:
1.Machine use servo three motor synchronize control, auto tape tension,center and surface rewinding together;
2.Machine use frequency adjust speed, keep stable running when speed up;
3.Auto counter quantity, auto fixed length, auto machine stop when had alarm , auto tension control etc function.
4.Feeding roll use air shaft use 3#(76mm paper tube core)
5.Rewinding use photocell control edge position control way
6.Circular knife slitting waste edge of roll, and it's auto let out by fan
7.Automatic pneumatic loading structure(Hydraulic shaft-less is the option)
Product Parameters:
| Model |
1300mm |
| Slitting thickness |
40g/m2~300g/m2 |
| Raw material Unwinding Diameter |
φ1400mm |
| Raw rewinding max.diameter |
φ1000mm |
| Slitting Max.Width |
40-1300mm |
| Rewinding air shaft diameter |
φ74mm/2pcs |
| Slitting Precision |
±0.2mm |
| Slitting Speed |
50-350m/min |
| Total Power |
26kw |
| Machine Size |
4500×3200×1850mm |
| Machine Weight |
4500kg |
| Machine cove color |
main white and black |
Machine Configuration:
1. Unwinding :(shaft-less is the option)
A. Machine rack use steel structure. Move around use linear guide.
B. Use hydraulic type air shaft automatic loading equipment 76(mm)
C. Move around use static type correction system.
D. Tension control:tension use brake control
2. Main Engineer(Surface friction type):Rack use 50# high quality casting structure
1) Driver and drive mechanism:
A. Capstan roll use motor and reducer rate combining way
B. Motor use servo(7.5KW) 1set
C. Frequency converter use Hongyuan 1set
2)Traction equipment:
A. Structure type: Active traction pneumatic press roller way
B. Driver way: main motor drive main drive roll, main axle drive main traction roll
C. Press way use pneumatic control
3)Slitting equipment:
A. Use circular knife slitting equipment structure
B. Round knife use Shanghai, can freely adjust 10pcs
C. Slitting Precision:±0.2mm
D. The waste side discharge system
3. Rewinding equipment:
Structure: Take two air shafts rewinding
A. Rewinding Roll use spline air shaft (3#Spec) 2pcs
B. Motor use servo(7.5KW) 2pcs
C. The inverter use V6/H7.5KW vector control 2pcs
D. Driver:Independent control gear transmission 2set
E. Rewinding Diameter Maximum 1000mm
F. Two Rewinding Shaft use automatic motor type unloading device form
1set
Control way
It's electrical control box and power supply together on the machine 1set
A. Machine's control system including main engineer speed control, unwinding tension control,rewinding
tension control, auto meter count etc control by PLC, touch screen use WEINVIEW Taiwan, PLC use Siemens
Germany; and other control(Hydraulic pressure type)
B. PLC auto meter counter, auto stop when alarm,auto fixed length.
C. It can auto stop when it reached the setting meter.
Auxiliary Equipment(Prepared by the user)
A. Power supply:3phase 4 wire switch; 380V 50HZ
FAQ
){kind=link}